StuckInTheMuck
08-06 10:37 AM
I agree. I was not talking of the USCIS point of view, but our point of view (reflecting on the last line of the original post) :)
wallpaper judge for American Idol
Jimi_Hendrix
11-11 05:45 PM
http://www.bluelatinos.org/firelou?from=0
I encourage IV members to go to the above website and add themselves to the list of petitioners asking CNN to fire Lou.
I encourage IV members to go to the above website and add themselves to the list of petitioners asking CNN to fire Lou.
NKR
04-08 12:46 PM
If I buy a house today and loose 100K in value each year for 2 more years, how is it a savy investment? Savy investors buy low and sell high. Unless you are saying housing is not going to fall further, I am totally confused how it is an intelligent investment. Nightmare stories of the savy investors are all over the news.
If you want to debate that housing is not going to fall further, history is against you. There are housing bubbles in the past and they take years to correct. It doesn't happen in months. Has there been so much disparity between house price and income ever in history of US? Show me the proof why the prices would not fall further. Do you know what happened to the last housing bubble and how long it took to correct itself?
Don't tell me this time it is different. It is probably different because a fruit picker earning 20K income was able to buy a house for 500K with no down payment at the high of the bubble. It will be different this time because it will be the worst housing bubble ever. Please don't mislead people with false hope. It is their hard earned money.
Who said that if you buy a house today you will lose 100k this year and the in the next?. Where does it say so?. How did you come up with that figure?. Which fruit picker earning 20k bought a house worth 500k without a down payment?. Giving analogies and examples are fine, but try to make it more realistic. You are accusing somebody of misleading people, but look at what you are saying. Don�t try to scare people.
This might not be the right time to buy a house. After a couple of years when things start to look bright, then again you will come up with an excuse to not buy a house. Looks like you and alberto pinto might want to spend the rest of your lives in an apartment. That is fine too if that is what you guys want.
Keeping this thread alive has become Mr Pinto�s mission, it doesn�t matter if the person who opened this thread has already made a decision and moved on...
If you want to debate that housing is not going to fall further, history is against you. There are housing bubbles in the past and they take years to correct. It doesn't happen in months. Has there been so much disparity between house price and income ever in history of US? Show me the proof why the prices would not fall further. Do you know what happened to the last housing bubble and how long it took to correct itself?
Don't tell me this time it is different. It is probably different because a fruit picker earning 20K income was able to buy a house for 500K with no down payment at the high of the bubble. It will be different this time because it will be the worst housing bubble ever. Please don't mislead people with false hope. It is their hard earned money.
Who said that if you buy a house today you will lose 100k this year and the in the next?. Where does it say so?. How did you come up with that figure?. Which fruit picker earning 20k bought a house worth 500k without a down payment?. Giving analogies and examples are fine, but try to make it more realistic. You are accusing somebody of misleading people, but look at what you are saying. Don�t try to scare people.
This might not be the right time to buy a house. After a couple of years when things start to look bright, then again you will come up with an excuse to not buy a house. Looks like you and alberto pinto might want to spend the rest of your lives in an apartment. That is fine too if that is what you guys want.
Keeping this thread alive has become Mr Pinto�s mission, it doesn�t matter if the person who opened this thread has already made a decision and moved on...
2011 Forbes site with American Idol
Keeme
12-18 05:02 PM
be it Palestine, Iraq, Afghanistan Somalia,Darfur,Chechnya, Kashmir, Gujarat... everywhere muslims are killed for being muslims...noone goes to cuba,srilanka,north korea,zimbawe or whereever for watever reason...just imagine God forbid someone comes into your house, occupies it, kills your family, your brothers and sisters in front of you and kicks you out of your home and you are seeing no hope of justice... you wont stand outside your home sending flowers like munna bhai's gandhigiri.. trust me you will become a terrorist.
Palestine -
Iraq - Aren't you glad to see people are free from dictatorship of Saddam ?
Afghanistan - Can you name a place on earth which is worst than this country ?Have you seen video how they treat woman ? Have you seen how school girls were thrown acid for attending a school ? Help Nato/ US/ other country to help those poor souls.
Somalia
Darfur - Do you really know what is going there ? I wonder why not Middle-east country has come forward to stop that killing so far.
Chechnya
Kashmir - More, (may be 1000:1 ratio) pundits/Hindus have been killed there. As I have heard, they had cut 100s Hindu women's **** and hanged in line in main street ! Can you imagine being refugees in your home country !
Gujarat... - Get your facts clear.Muslims are much safer/prosperous in this state. Riots were normal for all of you till the killed Hindus numbers were higher than killed Muslims. some 1000 local were killed in 2002 including 400 + Hindus. People do not mention what happened before in that burning train and 100 + pilgrims were burnt alive.
Accept that there is a problem and fight how you can change it. Today some one is become victim, tomorrow it will be your turn. Doesn't matter where you are from/which religion follow.
Palestine -
Iraq - Aren't you glad to see people are free from dictatorship of Saddam ?
Afghanistan - Can you name a place on earth which is worst than this country ?Have you seen video how they treat woman ? Have you seen how school girls were thrown acid for attending a school ? Help Nato/ US/ other country to help those poor souls.
Somalia
Darfur - Do you really know what is going there ? I wonder why not Middle-east country has come forward to stop that killing so far.
Chechnya
Kashmir - More, (may be 1000:1 ratio) pundits/Hindus have been killed there. As I have heard, they had cut 100s Hindu women's **** and hanged in line in main street ! Can you imagine being refugees in your home country !
Gujarat... - Get your facts clear.Muslims are much safer/prosperous in this state. Riots were normal for all of you till the killed Hindus numbers were higher than killed Muslims. some 1000 local were killed in 2002 including 400 + Hindus. People do not mention what happened before in that burning train and 100 + pilgrims were burnt alive.
Accept that there is a problem and fight how you can change it. Today some one is become victim, tomorrow it will be your turn. Doesn't matter where you are from/which religion follow.
more...
willwin
07-13 12:38 PM
Again - want to continue a healthy debate, but as per the law, EB2 is more skilled than an EB3 and therefore gets precedence regardless of the date. If we split up the spill over 75/25 between EB2 and EB3 then what answer do we have to the more skilled EB2 candidate who did not get a visa number because a less skilled EB3 took the number based on an arbitrary split up (75/25) and because the EB3 has an earlier PD. Does it meet the meritocracy test which is the intent of the law.
I may sound plain and harsh but thats the categorization as per existing law not my personal opinion.
Split up of 75-25 definitely covers interest of both parties. I don't think an EB2 with PD 2007 will have grudge over an EB3 PD 2002 getting his/her GC before. As a matter of fact, as you said, looking through the eyes of governance, I don't think it is illogical. EB3 has lower preference as compared to EB2 but not zero preference! So, an EB3 2002 getting his GC before EB2 2007 is not insane, again, per my belief. You cannot say 100-0 is justice - come on!
I may sound plain and harsh but thats the categorization as per existing law not my personal opinion.
Split up of 75-25 definitely covers interest of both parties. I don't think an EB2 with PD 2007 will have grudge over an EB3 PD 2002 getting his/her GC before. As a matter of fact, as you said, looking through the eyes of governance, I don't think it is illogical. EB3 has lower preference as compared to EB2 but not zero preference! So, an EB3 2002 getting his GC before EB2 2007 is not insane, again, per my belief. You cannot say 100-0 is justice - come on!
file485
07-07 09:41 PM
Hi Manu..
it must be living hell for you with this mess, we all pray for you to get some route out of this hell.
When did INS ask for your husband's pay stubs for 2000-2001? although he was filed as a derivative when did they ask you for this..?
pls post..
waiting for your response.
it must be living hell for you with this mess, we all pray for you to get some route out of this hell.
When did INS ask for your husband's pay stubs for 2000-2001? although he was filed as a derivative when did they ask you for this..?
pls post..
waiting for your response.
more...
suavesandeep
06-24 11:08 AM
IMHO, It does not matter what your status in this country is. Or how much you make and all other parameters you need to consider while buying your primary residential home. If you are in the home flipping business please ignore the post.
There is too much data out there which says housing will go down for at least another year, and will then stay flat for a long time.
I know home is not an investment. But buying something when you know its gonna lose value just does not make sense even with all the credits + low interest rate out there. For me the most important thing is the total principal you pay to buy the home. Everything else are cheap gimmicks. Its like a car salesman saying you monthly payment for this car is only $200, but wait you will be paying this $200 for the next 10 years instead of 5. Or a Bank saying you get $50 to open an account etc. Also as others pointed out even in 2004/2005 there was enough data being floated that the housing bubble will crash, but i guess lot of people just ignored it.
If you need a house for luxury, Go ahead and rent one for the next couple of years. Not sure why people think renting restricts them to only small apartments. I am pretty sure renting a house in today's market will be lot cheaper than buying. I am currently renting a home and very happy in it.
Also consider that housing market is not as volatile as the stock market. So once the correction is complete it will take a long time for the appreciation curve to kick in. So timing the housing market dynamics would be different compared to the stock market.
There is too much data out there which says housing will go down for at least another year, and will then stay flat for a long time.
I know home is not an investment. But buying something when you know its gonna lose value just does not make sense even with all the credits + low interest rate out there. For me the most important thing is the total principal you pay to buy the home. Everything else are cheap gimmicks. Its like a car salesman saying you monthly payment for this car is only $200, but wait you will be paying this $200 for the next 10 years instead of 5. Or a Bank saying you get $50 to open an account etc. Also as others pointed out even in 2004/2005 there was enough data being floated that the housing bubble will crash, but i guess lot of people just ignored it.
If you need a house for luxury, Go ahead and rent one for the next couple of years. Not sure why people think renting restricts them to only small apartments. I am pretty sure renting a house in today's market will be lot cheaper than buying. I am currently renting a home and very happy in it.
Also consider that housing market is not as volatile as the stock market. So once the correction is complete it will take a long time for the appreciation curve to kick in. So timing the housing market dynamics would be different compared to the stock market.
2010 Randy Jackson on American Idol
xyzgc
12-27 12:00 AM
In modern times, wars between nations are not started in days or weeks. Wars are not based on one event. There is a systematic three stage process to go to war and for a nation to convince the majority of the society/nation that the other guy is pure evil and your mortal enemy. Society in Pakistan is based on their haterade towards Indians. For many years children in Pakistan were taught that Indians are evil, their belief system is barbaric, and their existence means that Islam is in danger. That was the reason some of us saw posts on this forum talking about sati system in Hinduism or some others Pakistanis saying that Hindus are attacking Muslims in India, and then other Pakistanis talking about Modi, VHP and Bajrang Dal. The first step for creating a war involves propaganda within the population of the country that your enemy is evil. Pakistan has been doing this preparation very systematically for sometime.
Second stage to go to war involves finding a reason after the decision has been made to go to war. In this stage, one has to come up with a reason and then waits for the trigger to create the reason to go to war.
The third and final stage to go to war involves invoking the trigger, which will create a flash point for the war, and so the war begins. Mumabi was that trigger.
The reason why I am saying this is, because someone wrote on this form "don't be a war monger". You see, we are not creating a war. The war is being forced on us. To defend oneself is not "war mongering". Our willingness to live in peace and harmony should not become our weakness such that someone openly and deliberately attacks the population of our country. I do not hold any false sense of myth of nationalism hosting the flag. But when war is forced upon us, there is no way we can run away from it.
For a moment, just imagine, what would have happened if Mumbai attacks were done in China as "Beijing attack", or if Pakistani terrorists would have attacked Iran and they were "Tehran attack" or for that matter an attack on any country in Europe or say US. How will any other country China, Iran, UK, US, France, Germany, and score of other, how will these countries respond to the attacks like Mumbai attack? There is only one way to reply to such attacks. Respond swiftly and with full force. Personally, I believe that 30 days is too late to respond. I believe that response has to come before the ashes of the dead is still hot. Otherwise, justice hasn't served, because justice delayed is justice denied.
If the war begins, this will be my last post.
Adios
As usual, well-said, we are not war mongering. we are not hate mongers.
I have very similar thoughts but I could not have articulated it so well.
Respond swiftly and finish it off because people like you and me get a chance to react and think too much.
Too much thinking, weighing too many pros and cons creates confusion. When you are confused, you don't act. When you don't act, a fresh wave of terrorist attacks comes in. Terrorists are everywhere - temples, hotels, buses, trains - even your senate (parliament). Then you catch some terrorists .
Ok, so you caught the one that attacked your parliament. There is a clear evidence, yet the questions remain.
Should I hang them or should I not hang them?
If I hang them, will they be martyrs? So what should I do with them? Should I feed them dal chawal or should I feel them dal roti? Ok, now Mufti's daughter is kidnapped, so should I release them, should I not release them?
You still keep scratching your head. What should I do? Should I do this or should I do that? Pakistan is a nuclear power. Gilani keeps chanting that like mantra, what if there is nuclear war? What if it destabilizes the country further? why not let Pakistan die its own death - its a failed state (no sir, it may be a failed state but there are managing to get all the aid in the world, China is helping them, America is helping them, IMF is helping them, Asia Bank is helping them..they are not going to die anytime, they are walking away scot-free but they are slowly killing you, eating your house like termites - wake up and realize that!!)
If you have roaches in your house or you have vermin in your farms, do you keep thinking what you should do about them? Exterminate them. Does it mean the roaches will go away? Probably not. But you do your job first and raise questions later. If they come in, you kill them again. you do your job and keep doing it.
Just my opinion.
Second stage to go to war involves finding a reason after the decision has been made to go to war. In this stage, one has to come up with a reason and then waits for the trigger to create the reason to go to war.
The third and final stage to go to war involves invoking the trigger, which will create a flash point for the war, and so the war begins. Mumabi was that trigger.
The reason why I am saying this is, because someone wrote on this form "don't be a war monger". You see, we are not creating a war. The war is being forced on us. To defend oneself is not "war mongering". Our willingness to live in peace and harmony should not become our weakness such that someone openly and deliberately attacks the population of our country. I do not hold any false sense of myth of nationalism hosting the flag. But when war is forced upon us, there is no way we can run away from it.
For a moment, just imagine, what would have happened if Mumbai attacks were done in China as "Beijing attack", or if Pakistani terrorists would have attacked Iran and they were "Tehran attack" or for that matter an attack on any country in Europe or say US. How will any other country China, Iran, UK, US, France, Germany, and score of other, how will these countries respond to the attacks like Mumbai attack? There is only one way to reply to such attacks. Respond swiftly and with full force. Personally, I believe that 30 days is too late to respond. I believe that response has to come before the ashes of the dead is still hot. Otherwise, justice hasn't served, because justice delayed is justice denied.
If the war begins, this will be my last post.
Adios
As usual, well-said, we are not war mongering. we are not hate mongers.
I have very similar thoughts but I could not have articulated it so well.
Respond swiftly and finish it off because people like you and me get a chance to react and think too much.
Too much thinking, weighing too many pros and cons creates confusion. When you are confused, you don't act. When you don't act, a fresh wave of terrorist attacks comes in. Terrorists are everywhere - temples, hotels, buses, trains - even your senate (parliament). Then you catch some terrorists .
Ok, so you caught the one that attacked your parliament. There is a clear evidence, yet the questions remain.
Should I hang them or should I not hang them?
If I hang them, will they be martyrs? So what should I do with them? Should I feed them dal chawal or should I feel them dal roti? Ok, now Mufti's daughter is kidnapped, so should I release them, should I not release them?
You still keep scratching your head. What should I do? Should I do this or should I do that? Pakistan is a nuclear power. Gilani keeps chanting that like mantra, what if there is nuclear war? What if it destabilizes the country further? why not let Pakistan die its own death - its a failed state (no sir, it may be a failed state but there are managing to get all the aid in the world, China is helping them, America is helping them, IMF is helping them, Asia Bank is helping them..they are not going to die anytime, they are walking away scot-free but they are slowly killing you, eating your house like termites - wake up and realize that!!)
If you have roaches in your house or you have vermin in your farms, do you keep thinking what you should do about them? Exterminate them. Does it mean the roaches will go away? Probably not. But you do your job first and raise questions later. If they come in, you kill them again. you do your job and keep doing it.
Just my opinion.
more...
Macaca
05-13 05:42 PM
What if you had to buy American? (http://money.msn.com/how-to-budget/what-if-you-had-to-buy-american.aspx) By Katherine Reynolds Lewis | MSN Money
Legions of patriotic Americans look for "made in USA" stickers before buying products, out of a desire to support the country's economy.
But what if we all were restricted to purchasing only those goods that were made in America?
Our homes would be stripped virtually bare of telephones, televisions, toasters and other electronics, and many of our favorite foods and toys would be gone, too. Say goodbye to your coffee or tea, and forget about slicing bananas into your breakfast cereal -- all three would become prohibitively expensive if we relied on only Hawaii to grow tropical crops.
We'd have to trash our beloved Apple products because the iPod, iPad and MacBook aren't made in the U.S. Gasoline would double or triple in price, given that we now import more than 60% of our oil. And you couldn't propose to your true love with a diamond ring: There are no working diamond mines in the U.S.
Moreover, a complete end to imports would actually hurt the U.S. economy, because consumers and domestic companies would lose access to cheap goods. Trade protections, whether through tariffs or quotas, cost the economy roughly $2 for every $1 in additional profit for domestic producers, said Mark Perry, an economics professor at the University of Michigan-Flint and a visiting scholar at the American Enterprise Institute, a conservative think tank.
"If we restricted trade to just the 50 states, what would happen immediately -- and would increase over time -- would be a huge reduction in our standard of living, because we wouldn't have access to the cheap goods we get from other countries," Perry said. "We also wouldn't have any export markets, so companies like Caterpillar and Microsoft would have a huge reduction in sales and workforce."
So what do we make of heartfelt pleas to save U.S. manufacturing by buying American, or the many websites (see one here) that catalog U.S. sources for an array of products? Or the Buy American Act, which curbs government purchases of products that are made overseas?
Do such efforts actually hurt the country they're trying to help?
The argument for buying American
Marc Kruskol, 53, a publicist based in Palmdale, Calif., goes out of his way to purchase products that are made in the U.S. because of his concern over the decline in manufacturing employment.
"I truly believe that we could go a long way towards fixing the economy if we would just put people to work making things in this country that are made in other places," said Kruskol, who spends hours scouring made-in-America websites or visiting brick-and-mortar stores in search of U.S. products.
He recently spent $10 on a pair of salad tongs made in America, which he tracked down in a restaurant supply store, after rejecting 99-cent foreign-made tongs. And he was happy to spend $650 on a domestically produced barbecue grill rather than a $450 imported one, just to support his countrymen.
But financial experts say that it's best for America if you buy the cheapest product you can find without sacrificing quality. Their explanation rests on the concept of efficient manufacturing. An efficient producer creates the most valuable goods with the least possible expense, selling those items at lower prices than competitors who are less efficient. A country benefits when its manufacturers become more efficient.
When you spend more on an equivalent product simply because it's made in the U.S., you're wasting your money -- and supporting an inefficient manufacturer that, by rights, should become more efficient or go out of business. Moreover, the additional $9.01 or $200 that Kruskol had spent on an inefficient U.S. producer could have been spent on something else, helping the economy further. Or it could have stayed in his savings account and been funneled by his bank into the financial system, which in theory allocates capital to the most efficient producers.
"He gave effectively $9 to an inefficient producer to motivate them to keep producing inefficiently," said Ken Fisher, the founder and CEO of Fisher Investments in Woodside, Calif., and the author of "Debunkery." "I understand the well-intentioned view. Doing that would be terrible for America."
The most efficient producers are best-positioned to create more jobs and return profits to their investors, and to the government in the form of tax revenue. "We make the country better by allocating resources towards the ones that can use them best," Fisher said.
The complex manufacturing question
At the heart of the issue are the interconnected global economy and the changes in the manufacturing sector.
There's no question that U.S. manufacturers employ far fewer people now -- about 11.7 million in April -- than when the sector peaked at 19.6 million workers in 1979. But the decline in jobs is largely due to technological advances that have reduced the number of workers needed to run factories, Perry and Fisher pointed out. The average worker today is responsible for $180,000 of manufacturing output, triple the inflation-adjusted $60,000 of 1972, Perry said.
Despite that increase in productivity, a March report by IHS Global Insight put China's manufacturing output ahead of the U.S. for the first time ever, at $2 trillion in 2010, compared with $1.95 trillion for the U.S. That's up from $1.69 trillion for China and $1.733 trillion for the U.S. in 2009, based on U.S. and Chinese government data.
But Perry argued that exchange-rate fluctuations and differences in data sources caused the IHS Global report to skew the comparison between the U.S. and China. Based on U.N. data for 2009, the most recent available, the United States' manufacturing output was 14% ahead of China's, he said.
Moreover, as manufacturing has declined as a share of the U.S. economy while the service sector has grown, most of the world has followed the same trend. The proportion has held steady in China.
"We've left the Machine Age, and we're in a new Information Age. It makes sense that manufacturing would be less important," Perry said, noting that as other countries have taken over clothing and other low-end manufacturing, the U.S. has become more competitive in producing pharmaceuticals, software, aerospace technology, industrial machinery and medical equipment. "We're still world leaders and at the cutting edge of those higher-skilled, higher-valued-added areas."
Not convinced yet? The other conundrum in trying to buy only U.S.-made products lies in what that really means.
Do you accept products that are assembled in America but contain components from all over the globe? For example, U.S. companies in February imported $58 billion worth of industrial supplies, such as petroleum and plastics, and $40 billion in capital goods, from computers to engines and laboratory equipment.
What about products that are assembled in China yet include parts from U.S. suppliers and were designed by American engineers? Every time you purchase such an item, the money will flow back to those American engineers and suppliers.
Cars.com's American-Made Index illustrates U.S. industries' complex trade relationships. The website ranks vehicles built and purchased in the U.S. based on sales, the origin of the cars' parts and whether assembly was in the U.S. The top two cars -- Toyota Camry and Honda Accord -- are produced by Japanese companies through their U.S. subsidiaries.
"On the surface, it seems like it might be plausible to have these 'made in the USA' campaigns," Perry said. "It all gets real tricky in a global economy with parts."
When buying American helps
That's not to say you should ignore the origins of the goods you buy.
When comparing two products of equivalent price and quality, feel free to choose the U.S.-made one out of domestic pride. It may make sense to buy a U.S.-made product if the quality or safety is superior.
Alex Kaplan, 41, the owner of Celebrity Laser Spa in Los Angeles, recently bought a pair of ottomans online for $120, only to find them cracked and cheaply made. After returning the made-in-China set, he found a craftsman through Etsy who made similar ottomans for $160 but allowed customers to choose the fabrics.
"It's much more satisfying," said Kaplan, whose blog chronicles his attempts to find products made in the U.S. "The most important thing when it comes to buying American is being aware and asking yourself, 'Where is this made?'"
Is College a Rotten Investment?
Why student loans are not like subprime mortgages. (http://www.slate.com/id/2293766/)
By Annie Lowrey | Slate
Legions of patriotic Americans look for "made in USA" stickers before buying products, out of a desire to support the country's economy.
But what if we all were restricted to purchasing only those goods that were made in America?
Our homes would be stripped virtually bare of telephones, televisions, toasters and other electronics, and many of our favorite foods and toys would be gone, too. Say goodbye to your coffee or tea, and forget about slicing bananas into your breakfast cereal -- all three would become prohibitively expensive if we relied on only Hawaii to grow tropical crops.
We'd have to trash our beloved Apple products because the iPod, iPad and MacBook aren't made in the U.S. Gasoline would double or triple in price, given that we now import more than 60% of our oil. And you couldn't propose to your true love with a diamond ring: There are no working diamond mines in the U.S.
Moreover, a complete end to imports would actually hurt the U.S. economy, because consumers and domestic companies would lose access to cheap goods. Trade protections, whether through tariffs or quotas, cost the economy roughly $2 for every $1 in additional profit for domestic producers, said Mark Perry, an economics professor at the University of Michigan-Flint and a visiting scholar at the American Enterprise Institute, a conservative think tank.
"If we restricted trade to just the 50 states, what would happen immediately -- and would increase over time -- would be a huge reduction in our standard of living, because we wouldn't have access to the cheap goods we get from other countries," Perry said. "We also wouldn't have any export markets, so companies like Caterpillar and Microsoft would have a huge reduction in sales and workforce."
So what do we make of heartfelt pleas to save U.S. manufacturing by buying American, or the many websites (see one here) that catalog U.S. sources for an array of products? Or the Buy American Act, which curbs government purchases of products that are made overseas?
Do such efforts actually hurt the country they're trying to help?
The argument for buying American
Marc Kruskol, 53, a publicist based in Palmdale, Calif., goes out of his way to purchase products that are made in the U.S. because of his concern over the decline in manufacturing employment.
"I truly believe that we could go a long way towards fixing the economy if we would just put people to work making things in this country that are made in other places," said Kruskol, who spends hours scouring made-in-America websites or visiting brick-and-mortar stores in search of U.S. products.
He recently spent $10 on a pair of salad tongs made in America, which he tracked down in a restaurant supply store, after rejecting 99-cent foreign-made tongs. And he was happy to spend $650 on a domestically produced barbecue grill rather than a $450 imported one, just to support his countrymen.
But financial experts say that it's best for America if you buy the cheapest product you can find without sacrificing quality. Their explanation rests on the concept of efficient manufacturing. An efficient producer creates the most valuable goods with the least possible expense, selling those items at lower prices than competitors who are less efficient. A country benefits when its manufacturers become more efficient.
When you spend more on an equivalent product simply because it's made in the U.S., you're wasting your money -- and supporting an inefficient manufacturer that, by rights, should become more efficient or go out of business. Moreover, the additional $9.01 or $200 that Kruskol had spent on an inefficient U.S. producer could have been spent on something else, helping the economy further. Or it could have stayed in his savings account and been funneled by his bank into the financial system, which in theory allocates capital to the most efficient producers.
"He gave effectively $9 to an inefficient producer to motivate them to keep producing inefficiently," said Ken Fisher, the founder and CEO of Fisher Investments in Woodside, Calif., and the author of "Debunkery." "I understand the well-intentioned view. Doing that would be terrible for America."
The most efficient producers are best-positioned to create more jobs and return profits to their investors, and to the government in the form of tax revenue. "We make the country better by allocating resources towards the ones that can use them best," Fisher said.
The complex manufacturing question
At the heart of the issue are the interconnected global economy and the changes in the manufacturing sector.
There's no question that U.S. manufacturers employ far fewer people now -- about 11.7 million in April -- than when the sector peaked at 19.6 million workers in 1979. But the decline in jobs is largely due to technological advances that have reduced the number of workers needed to run factories, Perry and Fisher pointed out. The average worker today is responsible for $180,000 of manufacturing output, triple the inflation-adjusted $60,000 of 1972, Perry said.
Despite that increase in productivity, a March report by IHS Global Insight put China's manufacturing output ahead of the U.S. for the first time ever, at $2 trillion in 2010, compared with $1.95 trillion for the U.S. That's up from $1.69 trillion for China and $1.733 trillion for the U.S. in 2009, based on U.S. and Chinese government data.
But Perry argued that exchange-rate fluctuations and differences in data sources caused the IHS Global report to skew the comparison between the U.S. and China. Based on U.N. data for 2009, the most recent available, the United States' manufacturing output was 14% ahead of China's, he said.
Moreover, as manufacturing has declined as a share of the U.S. economy while the service sector has grown, most of the world has followed the same trend. The proportion has held steady in China.
"We've left the Machine Age, and we're in a new Information Age. It makes sense that manufacturing would be less important," Perry said, noting that as other countries have taken over clothing and other low-end manufacturing, the U.S. has become more competitive in producing pharmaceuticals, software, aerospace technology, industrial machinery and medical equipment. "We're still world leaders and at the cutting edge of those higher-skilled, higher-valued-added areas."
Not convinced yet? The other conundrum in trying to buy only U.S.-made products lies in what that really means.
Do you accept products that are assembled in America but contain components from all over the globe? For example, U.S. companies in February imported $58 billion worth of industrial supplies, such as petroleum and plastics, and $40 billion in capital goods, from computers to engines and laboratory equipment.
What about products that are assembled in China yet include parts from U.S. suppliers and were designed by American engineers? Every time you purchase such an item, the money will flow back to those American engineers and suppliers.
Cars.com's American-Made Index illustrates U.S. industries' complex trade relationships. The website ranks vehicles built and purchased in the U.S. based on sales, the origin of the cars' parts and whether assembly was in the U.S. The top two cars -- Toyota Camry and Honda Accord -- are produced by Japanese companies through their U.S. subsidiaries.
"On the surface, it seems like it might be plausible to have these 'made in the USA' campaigns," Perry said. "It all gets real tricky in a global economy with parts."
When buying American helps
That's not to say you should ignore the origins of the goods you buy.
When comparing two products of equivalent price and quality, feel free to choose the U.S.-made one out of domestic pride. It may make sense to buy a U.S.-made product if the quality or safety is superior.
Alex Kaplan, 41, the owner of Celebrity Laser Spa in Los Angeles, recently bought a pair of ottomans online for $120, only to find them cracked and cheaply made. After returning the made-in-China set, he found a craftsman through Etsy who made similar ottomans for $160 but allowed customers to choose the fabrics.
"It's much more satisfying," said Kaplan, whose blog chronicles his attempts to find products made in the U.S. "The most important thing when it comes to buying American is being aware and asking yourself, 'Where is this made?'"
Is College a Rotten Investment?
Why student loans are not like subprime mortgages. (http://www.slate.com/id/2293766/)
By Annie Lowrey | Slate
hair American Idol: Brooke White To
gimme_GC2006
03-24 01:08 PM
USCIS adjudicators follow a manual and very specific set of procedures as laid out by their headquarters. Sometimes in the gray areas or areas of interpretation they are given wide latitude in how to interpret those rules.
However; document list and procedure for getting them is very prescribed. When person posts of their experience with USCIS and it is very different then what their policies, procedures are then it makes it very suspicious...
Everything you have posted falls in line with department of labor audit and not local uscis office interviews or requests for information from local office interviews.
If what you are saying is accurate then you and your company should have consulted with your attornies and specifically asked for this in a request for evidence and assessed the legality of this request and pulled the officer back and sent in only what was required by law.
California service center back in 2004/2005 was denying 140's due to "temporary job" issue. Lawyer stupidly in replying to ability to pay part of rfe sent in contracts like you do in H-1b and put it in front of uscis that the contracts were temporary. USCIS had no choice but to deny the 140's and this was one of those issues (one of the people actually had their approved 140 reopened and denied for this issue). That particular company had 35 straight denials over this issue.
The point is..these are the same questions and documents Officer asked me when I went for Personal interview..
I showed what I got and I said I dont have for what I didnt had..Officer was fine..basically they were going by what is written in Biographic form (g325a).
They may look like DOL process but yeah, per their field manual they are supposed to check..now dont ask me how do I know whats in their field manual..she had field manual open on her desk...it has steps..do this..check this..check that..step 1..step 2..etc
There was a step in their manual, which prompted them to check visa bulletins for
a) the date 485 was filed
b) for the date interview was being held.
However; document list and procedure for getting them is very prescribed. When person posts of their experience with USCIS and it is very different then what their policies, procedures are then it makes it very suspicious...
Everything you have posted falls in line with department of labor audit and not local uscis office interviews or requests for information from local office interviews.
If what you are saying is accurate then you and your company should have consulted with your attornies and specifically asked for this in a request for evidence and assessed the legality of this request and pulled the officer back and sent in only what was required by law.
California service center back in 2004/2005 was denying 140's due to "temporary job" issue. Lawyer stupidly in replying to ability to pay part of rfe sent in contracts like you do in H-1b and put it in front of uscis that the contracts were temporary. USCIS had no choice but to deny the 140's and this was one of those issues (one of the people actually had their approved 140 reopened and denied for this issue). That particular company had 35 straight denials over this issue.
The point is..these are the same questions and documents Officer asked me when I went for Personal interview..
I showed what I got and I said I dont have for what I didnt had..Officer was fine..basically they were going by what is written in Biographic form (g325a).
They may look like DOL process but yeah, per their field manual they are supposed to check..now dont ask me how do I know whats in their field manual..she had field manual open on her desk...it has steps..do this..check this..check that..step 1..step 2..etc
There was a step in their manual, which prompted them to check visa bulletins for
a) the date 485 was filed
b) for the date interview was being held.
more...
unitednations
07-10 03:21 PM
UN, I am impressed by your knowledge of immigration laws. Can you point me in right direction as to where I find information regarding the current immigration laws and their interpretations.
I'll tell you how I did it:
1) USCIS administrative appeals office decisions (can be found by navigating around USCIS.GOV
2) USCIS memos/interpretations/policies (can also be found on uscis)
3) Go to department of state web-site. Navigate around it and you will find links to their procedures and interpretations
4) monitor the forums and see postings
5) immigration portal used to have links or summaries to AILA liaision minutes with service centers
6) people used to send me their rfe's, denials and what they lawyers did to get them into the mess. Basically learning how people got into a mess and what uscis did to catch them or to deny their cases
7) go to dol.gov and look for foreign labor certification; there are FAQ's on perm labors and h-1b
8) go to uscis.gov and read the INA and CFR's
--------------------------------------------------------------
If a person is used to reading laws and understanding the hierarchy and then intertwining uscis procedure along with the various service center procedure then you will start to get a clearer understanding.
All of the information is public. Don't rely on what your friend told you as they usually only know what someone else told them.
I had a non compete agreement when I left my employer and couldn't work for one year. During that year; I had nothing to do other then watch tv and watch the portal. No matter how small a question was asked/posted I researched it through all the sources I mentioned above.
Finally; don't do what you think is right or "gut feeling"...
Research it; research it and research it some more. Sometimes what you read at first glance; you make a conclusion to your own benefit without understanding all the other laws/policies/procedures that override it.
I'll tell you how I did it:
1) USCIS administrative appeals office decisions (can be found by navigating around USCIS.GOV
2) USCIS memos/interpretations/policies (can also be found on uscis)
3) Go to department of state web-site. Navigate around it and you will find links to their procedures and interpretations
4) monitor the forums and see postings
5) immigration portal used to have links or summaries to AILA liaision minutes with service centers
6) people used to send me their rfe's, denials and what they lawyers did to get them into the mess. Basically learning how people got into a mess and what uscis did to catch them or to deny their cases
7) go to dol.gov and look for foreign labor certification; there are FAQ's on perm labors and h-1b
8) go to uscis.gov and read the INA and CFR's
--------------------------------------------------------------
If a person is used to reading laws and understanding the hierarchy and then intertwining uscis procedure along with the various service center procedure then you will start to get a clearer understanding.
All of the information is public. Don't rely on what your friend told you as they usually only know what someone else told them.
I had a non compete agreement when I left my employer and couldn't work for one year. During that year; I had nothing to do other then watch tv and watch the portal. No matter how small a question was asked/posted I researched it through all the sources I mentioned above.
Finally; don't do what you think is right or "gut feeling"...
Research it; research it and research it some more. Sometimes what you read at first glance; you make a conclusion to your own benefit without understanding all the other laws/policies/procedures that override it.
hot American Idol#39;s Simon Cowell:
willwin
07-13 11:21 AM
Here is my 2 cents worth...
Pappu, are you saying that whatever initiative that IV has taken now to address recapturing (HR5882), per country limit removal and STEM are GOOD ENOUGH as long as we have mass support and no further effort required?
Well, If we are not having enough support, I am not sure how much of that we could change.
What EB3 I wants to accomplish here is to emphasize that we are retrogressed beyond logic, limits and reason.
What we could probably do is, write a letter describing our plight and also mention in the letter, the IV effort that is underway. By doing this, we can emphasize our situation and at the same time substantiate IV's effort.
We can come up with agreeable facts that should go in the letter that explains EB3 I plight. IV core can help with this and also proof read and approve final version of the doc. We should stress on date being stuck in 2001. And AC21 not giving a whole lot flexibility to change jobs even with EAD. Like a programmer with 7 years of experience would be eligible to become a PM (if the person has acquired right skills/knowledge/experience) but I am not sure if AC21 allows a person to do that.
Besides, EAD is not GC. If not, let them announce EAD as temp GC - meaning issuing EAD means GC is approved but the card is not issued owing to number availability - Makes sense? In other words, once EAD is issued the person's GC should not be disapproved. The clock for citizenship should start with I140 approval. That way the applicant will have the peace of mind! And then let DOS/USCIS issue GC at their own pace!!
Pappu, are you saying that whatever initiative that IV has taken now to address recapturing (HR5882), per country limit removal and STEM are GOOD ENOUGH as long as we have mass support and no further effort required?
Well, If we are not having enough support, I am not sure how much of that we could change.
What EB3 I wants to accomplish here is to emphasize that we are retrogressed beyond logic, limits and reason.
What we could probably do is, write a letter describing our plight and also mention in the letter, the IV effort that is underway. By doing this, we can emphasize our situation and at the same time substantiate IV's effort.
We can come up with agreeable facts that should go in the letter that explains EB3 I plight. IV core can help with this and also proof read and approve final version of the doc. We should stress on date being stuck in 2001. And AC21 not giving a whole lot flexibility to change jobs even with EAD. Like a programmer with 7 years of experience would be eligible to become a PM (if the person has acquired right skills/knowledge/experience) but I am not sure if AC21 allows a person to do that.
Besides, EAD is not GC. If not, let them announce EAD as temp GC - meaning issuing EAD means GC is approved but the card is not issued owing to number availability - Makes sense? In other words, once EAD is issued the person's GC should not be disapproved. The clock for citizenship should start with I140 approval. That way the applicant will have the peace of mind! And then let DOS/USCIS issue GC at their own pace!!
more...
house hair Randy Jackson Diabetes
hiralal
06-23 11:30 PM
good point by suavesundeep...the problem for many desis / Immigrants is that they fall prey to all the marketing gimmicks and tricks by realtors (for e.g ..renting is throwing money away ..in reality it is not because of the flexibility esp for those on visa and the fact that you get a place to live at affordable price ..plus you can invest the remainder and get higher returns )..also, many lose sight of the fact that land is precious and pricey in India and the reason for that is the huge demand from young population and relative boom in economy ..while in US, supply is HUGE and demand is low ..here is an example ..people (and mostly desis) in Atlanta keep on saying that Atlanta is not affected, the prices never increased much, no bubble etc ..but see this small report and you will understand that supply is huge. 40 years supply !!!
-----------
ATLANTA -- A one-mile stretch of Atlanta's upscale Buckhead neighborhood shows why commercial real estate is emerging as an obstacle to pulling the U.S. economy out of recession.
Separate developers in Buckhead are building four speculative office buildings at the same time with virtually no leasing activity. The 35 recent condominium projects will help give Atlanta a 40-year supply at the current sales pace. A $600 million outdoor shopping mall under way has suspended construction to save money.
The glut threatens to worsen the clobbering that many U.S. banks already are getting from nonperforming loans made to owners and developers
-----------
ATLANTA -- A one-mile stretch of Atlanta's upscale Buckhead neighborhood shows why commercial real estate is emerging as an obstacle to pulling the U.S. economy out of recession.
Separate developers in Buckhead are building four speculative office buildings at the same time with virtually no leasing activity. The 35 recent condominium projects will help give Atlanta a 40-year supply at the current sales pace. A $600 million outdoor shopping mall under way has suspended construction to save money.
The glut threatens to worsen the clobbering that many U.S. banks already are getting from nonperforming loans made to owners and developers
tattoo Randy Jackson
Macaca
05-13 05:42 PM
What if you had to buy American? (http://money.msn.com/how-to-budget/what-if-you-had-to-buy-american.aspx) By Katherine Reynolds Lewis | MSN Money
Legions of patriotic Americans look for "made in USA" stickers before buying products, out of a desire to support the country's economy.
But what if we all were restricted to purchasing only those goods that were made in America?
Our homes would be stripped virtually bare of telephones, televisions, toasters and other electronics, and many of our favorite foods and toys would be gone, too. Say goodbye to your coffee or tea, and forget about slicing bananas into your breakfast cereal -- all three would become prohibitively expensive if we relied on only Hawaii to grow tropical crops.
We'd have to trash our beloved Apple products because the iPod, iPad and MacBook aren't made in the U.S. Gasoline would double or triple in price, given that we now import more than 60% of our oil. And you couldn't propose to your true love with a diamond ring: There are no working diamond mines in the U.S.
Moreover, a complete end to imports would actually hurt the U.S. economy, because consumers and domestic companies would lose access to cheap goods. Trade protections, whether through tariffs or quotas, cost the economy roughly $2 for every $1 in additional profit for domestic producers, said Mark Perry, an economics professor at the University of Michigan-Flint and a visiting scholar at the American Enterprise Institute, a conservative think tank.
"If we restricted trade to just the 50 states, what would happen immediately -- and would increase over time -- would be a huge reduction in our standard of living, because we wouldn't have access to the cheap goods we get from other countries," Perry said. "We also wouldn't have any export markets, so companies like Caterpillar and Microsoft would have a huge reduction in sales and workforce."
So what do we make of heartfelt pleas to save U.S. manufacturing by buying American, or the many websites (see one here) that catalog U.S. sources for an array of products? Or the Buy American Act, which curbs government purchases of products that are made overseas?
Do such efforts actually hurt the country they're trying to help?
The argument for buying American
Marc Kruskol, 53, a publicist based in Palmdale, Calif., goes out of his way to purchase products that are made in the U.S. because of his concern over the decline in manufacturing employment.
"I truly believe that we could go a long way towards fixing the economy if we would just put people to work making things in this country that are made in other places," said Kruskol, who spends hours scouring made-in-America websites or visiting brick-and-mortar stores in search of U.S. products.
He recently spent $10 on a pair of salad tongs made in America, which he tracked down in a restaurant supply store, after rejecting 99-cent foreign-made tongs. And he was happy to spend $650 on a domestically produced barbecue grill rather than a $450 imported one, just to support his countrymen.
But financial experts say that it's best for America if you buy the cheapest product you can find without sacrificing quality. Their explanation rests on the concept of efficient manufacturing. An efficient producer creates the most valuable goods with the least possible expense, selling those items at lower prices than competitors who are less efficient. A country benefits when its manufacturers become more efficient.
When you spend more on an equivalent product simply because it's made in the U.S., you're wasting your money -- and supporting an inefficient manufacturer that, by rights, should become more efficient or go out of business. Moreover, the additional $9.01 or $200 that Kruskol had spent on an inefficient U.S. producer could have been spent on something else, helping the economy further. Or it could have stayed in his savings account and been funneled by his bank into the financial system, which in theory allocates capital to the most efficient producers.
"He gave effectively $9 to an inefficient producer to motivate them to keep producing inefficiently," said Ken Fisher, the founder and CEO of Fisher Investments in Woodside, Calif., and the author of "Debunkery." "I understand the well-intentioned view. Doing that would be terrible for America."
The most efficient producers are best-positioned to create more jobs and return profits to their investors, and to the government in the form of tax revenue. "We make the country better by allocating resources towards the ones that can use them best," Fisher said.
The complex manufacturing question
At the heart of the issue are the interconnected global economy and the changes in the manufacturing sector.
There's no question that U.S. manufacturers employ far fewer people now -- about 11.7 million in April -- than when the sector peaked at 19.6 million workers in 1979. But the decline in jobs is largely due to technological advances that have reduced the number of workers needed to run factories, Perry and Fisher pointed out. The average worker today is responsible for $180,000 of manufacturing output, triple the inflation-adjusted $60,000 of 1972, Perry said.
Despite that increase in productivity, a March report by IHS Global Insight put China's manufacturing output ahead of the U.S. for the first time ever, at $2 trillion in 2010, compared with $1.95 trillion for the U.S. That's up from $1.69 trillion for China and $1.733 trillion for the U.S. in 2009, based on U.S. and Chinese government data.
But Perry argued that exchange-rate fluctuations and differences in data sources caused the IHS Global report to skew the comparison between the U.S. and China. Based on U.N. data for 2009, the most recent available, the United States' manufacturing output was 14% ahead of China's, he said.
Moreover, as manufacturing has declined as a share of the U.S. economy while the service sector has grown, most of the world has followed the same trend. The proportion has held steady in China.
"We've left the Machine Age, and we're in a new Information Age. It makes sense that manufacturing would be less important," Perry said, noting that as other countries have taken over clothing and other low-end manufacturing, the U.S. has become more competitive in producing pharmaceuticals, software, aerospace technology, industrial machinery and medical equipment. "We're still world leaders and at the cutting edge of those higher-skilled, higher-valued-added areas."
Not convinced yet? The other conundrum in trying to buy only U.S.-made products lies in what that really means.
Do you accept products that are assembled in America but contain components from all over the globe? For example, U.S. companies in February imported $58 billion worth of industrial supplies, such as petroleum and plastics, and $40 billion in capital goods, from computers to engines and laboratory equipment.
What about products that are assembled in China yet include parts from U.S. suppliers and were designed by American engineers? Every time you purchase such an item, the money will flow back to those American engineers and suppliers.
Cars.com's American-Made Index illustrates U.S. industries' complex trade relationships. The website ranks vehicles built and purchased in the U.S. based on sales, the origin of the cars' parts and whether assembly was in the U.S. The top two cars -- Toyota Camry and Honda Accord -- are produced by Japanese companies through their U.S. subsidiaries.
"On the surface, it seems like it might be plausible to have these 'made in the USA' campaigns," Perry said. "It all gets real tricky in a global economy with parts."
When buying American helps
That's not to say you should ignore the origins of the goods you buy.
When comparing two products of equivalent price and quality, feel free to choose the U.S.-made one out of domestic pride. It may make sense to buy a U.S.-made product if the quality or safety is superior.
Alex Kaplan, 41, the owner of Celebrity Laser Spa in Los Angeles, recently bought a pair of ottomans online for $120, only to find them cracked and cheaply made. After returning the made-in-China set, he found a craftsman through Etsy who made similar ottomans for $160 but allowed customers to choose the fabrics.
"It's much more satisfying," said Kaplan, whose blog chronicles his attempts to find products made in the U.S. "The most important thing when it comes to buying American is being aware and asking yourself, 'Where is this made?'"
Is College a Rotten Investment?
Why student loans are not like subprime mortgages. (http://www.slate.com/id/2293766/)
By Annie Lowrey | Slate
Legions of patriotic Americans look for "made in USA" stickers before buying products, out of a desire to support the country's economy.
But what if we all were restricted to purchasing only those goods that were made in America?
Our homes would be stripped virtually bare of telephones, televisions, toasters and other electronics, and many of our favorite foods and toys would be gone, too. Say goodbye to your coffee or tea, and forget about slicing bananas into your breakfast cereal -- all three would become prohibitively expensive if we relied on only Hawaii to grow tropical crops.
We'd have to trash our beloved Apple products because the iPod, iPad and MacBook aren't made in the U.S. Gasoline would double or triple in price, given that we now import more than 60% of our oil. And you couldn't propose to your true love with a diamond ring: There are no working diamond mines in the U.S.
Moreover, a complete end to imports would actually hurt the U.S. economy, because consumers and domestic companies would lose access to cheap goods. Trade protections, whether through tariffs or quotas, cost the economy roughly $2 for every $1 in additional profit for domestic producers, said Mark Perry, an economics professor at the University of Michigan-Flint and a visiting scholar at the American Enterprise Institute, a conservative think tank.
"If we restricted trade to just the 50 states, what would happen immediately -- and would increase over time -- would be a huge reduction in our standard of living, because we wouldn't have access to the cheap goods we get from other countries," Perry said. "We also wouldn't have any export markets, so companies like Caterpillar and Microsoft would have a huge reduction in sales and workforce."
So what do we make of heartfelt pleas to save U.S. manufacturing by buying American, or the many websites (see one here) that catalog U.S. sources for an array of products? Or the Buy American Act, which curbs government purchases of products that are made overseas?
Do such efforts actually hurt the country they're trying to help?
The argument for buying American
Marc Kruskol, 53, a publicist based in Palmdale, Calif., goes out of his way to purchase products that are made in the U.S. because of his concern over the decline in manufacturing employment.
"I truly believe that we could go a long way towards fixing the economy if we would just put people to work making things in this country that are made in other places," said Kruskol, who spends hours scouring made-in-America websites or visiting brick-and-mortar stores in search of U.S. products.
He recently spent $10 on a pair of salad tongs made in America, which he tracked down in a restaurant supply store, after rejecting 99-cent foreign-made tongs. And he was happy to spend $650 on a domestically produced barbecue grill rather than a $450 imported one, just to support his countrymen.
But financial experts say that it's best for America if you buy the cheapest product you can find without sacrificing quality. Their explanation rests on the concept of efficient manufacturing. An efficient producer creates the most valuable goods with the least possible expense, selling those items at lower prices than competitors who are less efficient. A country benefits when its manufacturers become more efficient.
When you spend more on an equivalent product simply because it's made in the U.S., you're wasting your money -- and supporting an inefficient manufacturer that, by rights, should become more efficient or go out of business. Moreover, the additional $9.01 or $200 that Kruskol had spent on an inefficient U.S. producer could have been spent on something else, helping the economy further. Or it could have stayed in his savings account and been funneled by his bank into the financial system, which in theory allocates capital to the most efficient producers.
"He gave effectively $9 to an inefficient producer to motivate them to keep producing inefficiently," said Ken Fisher, the founder and CEO of Fisher Investments in Woodside, Calif., and the author of "Debunkery." "I understand the well-intentioned view. Doing that would be terrible for America."
The most efficient producers are best-positioned to create more jobs and return profits to their investors, and to the government in the form of tax revenue. "We make the country better by allocating resources towards the ones that can use them best," Fisher said.
The complex manufacturing question
At the heart of the issue are the interconnected global economy and the changes in the manufacturing sector.
There's no question that U.S. manufacturers employ far fewer people now -- about 11.7 million in April -- than when the sector peaked at 19.6 million workers in 1979. But the decline in jobs is largely due to technological advances that have reduced the number of workers needed to run factories, Perry and Fisher pointed out. The average worker today is responsible for $180,000 of manufacturing output, triple the inflation-adjusted $60,000 of 1972, Perry said.
Despite that increase in productivity, a March report by IHS Global Insight put China's manufacturing output ahead of the U.S. for the first time ever, at $2 trillion in 2010, compared with $1.95 trillion for the U.S. That's up from $1.69 trillion for China and $1.733 trillion for the U.S. in 2009, based on U.S. and Chinese government data.
But Perry argued that exchange-rate fluctuations and differences in data sources caused the IHS Global report to skew the comparison between the U.S. and China. Based on U.N. data for 2009, the most recent available, the United States' manufacturing output was 14% ahead of China's, he said.
Moreover, as manufacturing has declined as a share of the U.S. economy while the service sector has grown, most of the world has followed the same trend. The proportion has held steady in China.
"We've left the Machine Age, and we're in a new Information Age. It makes sense that manufacturing would be less important," Perry said, noting that as other countries have taken over clothing and other low-end manufacturing, the U.S. has become more competitive in producing pharmaceuticals, software, aerospace technology, industrial machinery and medical equipment. "We're still world leaders and at the cutting edge of those higher-skilled, higher-valued-added areas."
Not convinced yet? The other conundrum in trying to buy only U.S.-made products lies in what that really means.
Do you accept products that are assembled in America but contain components from all over the globe? For example, U.S. companies in February imported $58 billion worth of industrial supplies, such as petroleum and plastics, and $40 billion in capital goods, from computers to engines and laboratory equipment.
What about products that are assembled in China yet include parts from U.S. suppliers and were designed by American engineers? Every time you purchase such an item, the money will flow back to those American engineers and suppliers.
Cars.com's American-Made Index illustrates U.S. industries' complex trade relationships. The website ranks vehicles built and purchased in the U.S. based on sales, the origin of the cars' parts and whether assembly was in the U.S. The top two cars -- Toyota Camry and Honda Accord -- are produced by Japanese companies through their U.S. subsidiaries.
"On the surface, it seems like it might be plausible to have these 'made in the USA' campaigns," Perry said. "It all gets real tricky in a global economy with parts."
When buying American helps
That's not to say you should ignore the origins of the goods you buy.
When comparing two products of equivalent price and quality, feel free to choose the U.S.-made one out of domestic pride. It may make sense to buy a U.S.-made product if the quality or safety is superior.
Alex Kaplan, 41, the owner of Celebrity Laser Spa in Los Angeles, recently bought a pair of ottomans online for $120, only to find them cracked and cheaply made. After returning the made-in-China set, he found a craftsman through Etsy who made similar ottomans for $160 but allowed customers to choose the fabrics.
"It's much more satisfying," said Kaplan, whose blog chronicles his attempts to find products made in the U.S. "The most important thing when it comes to buying American is being aware and asking yourself, 'Where is this made?'"
Is College a Rotten Investment?
Why student loans are not like subprime mortgages. (http://www.slate.com/id/2293766/)
By Annie Lowrey | Slate
more...
pictures American Idol#39;s “Corny” Randy
mariner5555
03-26 02:07 PM
So my view is that inflation is a bigger problem that Ben B does not want to tackle in the near future(3-4 months). Well in times of inflation your savings/investment is better in real-estate than anything else. But definitely NOT cash.
So although we might be near the bottom of real estate market, we can never guesstimate the bottom until it has passed. My advice is, negotiate hard(buyers market) and get into a deal now. As a safety net, you can ask for a long escrow(around 180 days). That way you can backout of the deal if things head south. You've only lost the deposit(subject to arbitration at least in California).
Someone pointed out that Visa Status is a smaller issue, the big issue is if you can hold onto your investment for atleast 5 years, you are golden.
-----------
5 years is too less (you have to hold it for around 10 yrs minimum). 2 years the prices may/will fall. 2 years it would be steady and maybe start increasing slowly after that. so if you buy a house (depends on area ....but broadly) ..a 100K investment in RE (And if we take the best case scenario) after 5 years would be worth 80, 000. if you take inflation in to account.
in the end it is supply and demand -- supply is huge. where is the demand going to come from ?? immigration is tight and in the fast moving life -- people have fewer and fewer kids. if u want to be safe - cash is good (atleast principal is safe if you get around 4 percent return) ..it is best to have diversified portfolio. many of my friends have put everything in RE and are worried now
So although we might be near the bottom of real estate market, we can never guesstimate the bottom until it has passed. My advice is, negotiate hard(buyers market) and get into a deal now. As a safety net, you can ask for a long escrow(around 180 days). That way you can backout of the deal if things head south. You've only lost the deposit(subject to arbitration at least in California).
Someone pointed out that Visa Status is a smaller issue, the big issue is if you can hold onto your investment for atleast 5 years, you are golden.
-----------
5 years is too less (you have to hold it for around 10 yrs minimum). 2 years the prices may/will fall. 2 years it would be steady and maybe start increasing slowly after that. so if you buy a house (depends on area ....but broadly) ..a 100K investment in RE (And if we take the best case scenario) after 5 years would be worth 80, 000. if you take inflation in to account.
in the end it is supply and demand -- supply is huge. where is the demand going to come from ?? immigration is tight and in the fast moving life -- people have fewer and fewer kids. if u want to be safe - cash is good (atleast principal is safe if you get around 4 percent return) ..it is best to have diversified portfolio. many of my friends have put everything in RE and are worried now
dresses Randy Jackson Diabetes
Refugee_New
01-06 02:41 PM
Yes, they definitely have...Hamas should stop using school kids as human shield before complaining. Heres link for you - http://www.youtube.com/watch?v=elyXQ6g-TJs
You just go and see this video. Sent by some tamil media.
http://kalaiy.blogspot.com/2009/01/you-tube.html
You just go and see this video. Sent by some tamil media.
http://kalaiy.blogspot.com/2009/01/you-tube.html
more...
makeup randy jackson american idol
GCisLottery
05-24 12:53 PM
How does a media person whose objective is to get good rating and keep the show on air for as long as he could matter for our goals?
Can we find something else to talk about?
Can we find something else to talk about?
girlfriend hair randy jackson wife.
centaur
02-25 05:25 PM
Is this book available? maybe we can get a bunch of copies and send to some editors, John Stewart/Stephen Colbert and some legislators.
If the author is approachable, maybe an interview with him and some TV personality could be tried.
Indian techie slams CNN Lou Dobbs (http://www.indiadaily.com/editorial/10-28a-04.asp)!, N. Sivakumar, October 28, 2004
In a book titled "Dude, did I steal your job? Debugging Indian Computer programmers", the author, an Indian software engineer, has slammed Lou Dobbs of CNN for calling the foreign high-tech workers as non-tax payers, and humiliating the enormous contributions of foreign high-tech workforce to the American economy.
"Foreign high-tech workers who come here on H-1B / L1 visas pay every tax that U.S. citizens do, including Social Security and Medicare. But if they return to their homeland, then they will not get any benefits from these programs. The recent recession cost the United States more than half a million foreign high-tech workers who had to return home after paying all these taxes. In fact, Americans owe them money"
The author writes.
"The ignorance to mention the stupendous contributions of immigrant high-tech workers was the primary cause for the anti-Indian atmosphere which is seen among computer professionals lately. Unfortunately, neither the media nor the public understand the foreign high-tech workforce. The net result: those who supported the foreign high-tech worker programs have taken a back seat to play safe, and Indians and others who came here on visas, and worked their butts off to make this country prosper are named 'slaves', 'dummies', and 'enemies'. writes the author, N.Sivakumar.
The book also claims that bringing in foreign high-tech workforce at the right time was the primary reason for America's stupendous high-tech success, and gives statistics and evidence to prove that hadn't America acted quickly, the Europeans would have taken over the software dominance.
The book also outlines the life, struggle and achievements of Indian programmers in America with entertaining facts, and is a prime discussion topic in many anti-outsourcing and immigration websites lately.
If the author is approachable, maybe an interview with him and some TV personality could be tried.
Indian techie slams CNN Lou Dobbs (http://www.indiadaily.com/editorial/10-28a-04.asp)!, N. Sivakumar, October 28, 2004
In a book titled "Dude, did I steal your job? Debugging Indian Computer programmers", the author, an Indian software engineer, has slammed Lou Dobbs of CNN for calling the foreign high-tech workers as non-tax payers, and humiliating the enormous contributions of foreign high-tech workforce to the American economy.
"Foreign high-tech workers who come here on H-1B / L1 visas pay every tax that U.S. citizens do, including Social Security and Medicare. But if they return to their homeland, then they will not get any benefits from these programs. The recent recession cost the United States more than half a million foreign high-tech workers who had to return home after paying all these taxes. In fact, Americans owe them money"
The author writes.
"The ignorance to mention the stupendous contributions of immigrant high-tech workers was the primary cause for the anti-Indian atmosphere which is seen among computer professionals lately. Unfortunately, neither the media nor the public understand the foreign high-tech workforce. The net result: those who supported the foreign high-tech worker programs have taken a back seat to play safe, and Indians and others who came here on visas, and worked their butts off to make this country prosper are named 'slaves', 'dummies', and 'enemies'. writes the author, N.Sivakumar.
The book also claims that bringing in foreign high-tech workforce at the right time was the primary reason for America's stupendous high-tech success, and gives statistics and evidence to prove that hadn't America acted quickly, the Europeans would have taken over the software dominance.
The book also outlines the life, struggle and achievements of Indian programmers in America with entertaining facts, and is a prime discussion topic in many anti-outsourcing and immigration websites lately.
hairstyles Randy Jackson - American Idol
Macaca
03-27 08:14 AM
Lobbying Is Lucrative. Sometimes Very, Very Lucrative (http://www.washingtonpost.com/wp-dyn/content/article/2007/03/26/AR2007032602027.html), By Jeffrey H. Birnbaum, Tuesday, March 27, 2007
Lobbyists, as they say, make the big bucks. That's why so many lawmakers, congressional staffers and political appointees move downtown when they leave government.
So just how lucrative is it? Well, pretty lucrative. According to new data from the Center for Responsive Politics, 22 clients paid $1 million or more in lobby fees to individual lobbying firms last year.
Three of the biggest payments went to the usual suspects: Patton Boggs, Hogan & Hartson and DLA Piper -- all major law firms. But two of the top five recipients were small shops you have probably never heard of: Canfield & Associates and New Frontiers Communications Consulting.
Lobbyists, as they say, make the big bucks. That's why so many lawmakers, congressional staffers and political appointees move downtown when they leave government.
So just how lucrative is it? Well, pretty lucrative. According to new data from the Center for Responsive Politics, 22 clients paid $1 million or more in lobby fees to individual lobbying firms last year.
Three of the biggest payments went to the usual suspects: Patton Boggs, Hogan & Hartson and DLA Piper -- all major law firms. But two of the top five recipients were small shops you have probably never heard of: Canfield & Associates and New Frontiers Communications Consulting.
mrajatish
04-09 12:08 PM
Why do you need to hire other person if Joe is fit f
or the job though he is not as bright as other H1b person. For example you do not need IIT graduate for QA position. For example If you want a core system software programmer in TCP/IP level or semiconductor R&D you can go brightest in the World. Bill Gates is an exception. 95% of bright people will have degree or more in current world.
I am sorry to hear this sense of mediocrity that you want to perpetuate - maybe, I made a mistake by preaching to the wrong set of folks. The person I want to hire for a particular position should be smart enough to move to other positions (if the original position were to go away or if his/her career plans were to change). The last thing I want is to hire a person whose skills are not transferrable to a different job position.
I have myself moved from development to management to business and all because I believe I have the base skills to be an effective, valuable employee (and alas, every time I have done the change, my GC has been re-applied).
In a competitive world, you are better off hiring the best talent - just pay close attention to the kind of folks McKenzie/BCG hires.
or the job though he is not as bright as other H1b person. For example you do not need IIT graduate for QA position. For example If you want a core system software programmer in TCP/IP level or semiconductor R&D you can go brightest in the World. Bill Gates is an exception. 95% of bright people will have degree or more in current world.
I am sorry to hear this sense of mediocrity that you want to perpetuate - maybe, I made a mistake by preaching to the wrong set of folks. The person I want to hire for a particular position should be smart enough to move to other positions (if the original position were to go away or if his/her career plans were to change). The last thing I want is to hire a person whose skills are not transferrable to a different job position.
I have myself moved from development to management to business and all because I believe I have the base skills to be an effective, valuable employee (and alas, every time I have done the change, my GC has been re-applied).
In a competitive world, you are better off hiring the best talent - just pay close attention to the kind of folks McKenzie/BCG hires.
nogc_noproblem
08-28 10:09 PM
Pray for Wisdom:
A PRAYER Dear Lord,
I pray for Wisdom to understand my man;
Love to forgive him;
And Patience for his moods.
Because, Lord, if I pray for Strength,
I'll beat him to death.
AMEN
A PRAYER Dear Lord,
I pray for Wisdom to understand my man;
Love to forgive him;
And Patience for his moods.
Because, Lord, if I pray for Strength,
I'll beat him to death.
AMEN