dealsnet
03-05 07:08 PM
Talk with hospitals in your area. May be $10K for the expense, if you didn't find any insurance to cover the pre-existing condition.
Spend it to get a US citizen child or save that money and make delivery happen in India.
btw her location will be @ Portland, Oregon.
Regards
Spend it to get a US citizen child or save that money and make delivery happen in India.
btw her location will be @ Portland, Oregon.
Regards
wallpaper fighting irish tattoos. fighting irish tattoos; fighting irish tattoos
Charleh
05-28 05:14 AM
You can bind them quite easily, assuming your data sources implement the correct interfaces (I believe IBindable/IBindableList).
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
a_yaja
07-18 09:24 AM
I was thinking about that as well...but I have minor problems that might not be solved within July so it better for me to apply in August.
I would advise you to file in July. Although USCIS says it will accept application till Aug 17th, in theory they could reject your application saying that your priority date is August. It would be heartburn for you all over again. If you can explain what your "minor" problems are, perhaps some of us could suggest a way out.
Good Luck on your filing and hope you make the July deadline.
I would advise you to file in July. Although USCIS says it will accept application till Aug 17th, in theory they could reject your application saying that your priority date is August. It would be heartburn for you all over again. If you can explain what your "minor" problems are, perhaps some of us could suggest a way out.
Good Luck on your filing and hope you make the July deadline.
2011 fighting irish tattoos.
gc_relief
04-27 03:09 PM
Guys..I'm sorry ..I'm mixing up things,,Here are the accurate details..
Labour Priority date is Nov'20 2007
My I-140 receipt date is Feb'20 2008..
My I-140 Approve date is Sep'24 2008
My 6 years H-1 will be completed by Jan'2010..but still my H-1 was denied..
Labour Priority date is Nov'20 2007
My I-140 receipt date is Feb'20 2008..
My I-140 Approve date is Sep'24 2008
My 6 years H-1 will be completed by Jan'2010..but still my H-1 was denied..
more...
fatjoe
09-05 01:02 PM
I guess, if you attorney represented you thru' form G-28, then it goes your attr. If you have not sent G28, then you will get it directly. Guys, correct me if I'm wrong.
Lisap
08-27 05:54 PM
Should I call CIS to see what they say??? Anyone??
more...
fromnaija
03-08 05:53 PM
Did you file to change to H4 after your H1 transfer was rejected? If you did not, you might want to talk to a lawyer as you may probably be out of status.
Hi,
My husband filed I485 in August 2007 and included me as derivative. I also hold H1B visa from January 2005. I entered US in H4 visa in 2001 and later converted to H1. My questions and concerns are will the immigration officer will dig into my employment history starting from Jan 2005 till now and ask for paystubs and w2 etc. I submitted 3 months paystubs along with I485 form. Is that just enough? I have sleepless nights nowadays. This is my situation. Employer A who got me H1B initially in 2005 could not get me a project continuously for about one year. So later I tranferred my H1 to another company B. Company B got me project and started working for company B after a long gap. Subsequently my H1 tranfer to company B was rejected during Feb 2007 due to some reason. Since I was in a project, company B again filed for another H1 transfer through it's another sister company C in March 2007. Got RFE and because of abondonment it was also rejected in October 2007. While I filed I485, I submitted 3 months paystubs of company C. My concern is will I be scrutinized by the immigration officer while processing my I485? Please experts, your suggestion and help is much appreciated.
Hi,
My husband filed I485 in August 2007 and included me as derivative. I also hold H1B visa from January 2005. I entered US in H4 visa in 2001 and later converted to H1. My questions and concerns are will the immigration officer will dig into my employment history starting from Jan 2005 till now and ask for paystubs and w2 etc. I submitted 3 months paystubs along with I485 form. Is that just enough? I have sleepless nights nowadays. This is my situation. Employer A who got me H1B initially in 2005 could not get me a project continuously for about one year. So later I tranferred my H1 to another company B. Company B got me project and started working for company B after a long gap. Subsequently my H1 tranfer to company B was rejected during Feb 2007 due to some reason. Since I was in a project, company B again filed for another H1 transfer through it's another sister company C in March 2007. Got RFE and because of abondonment it was also rejected in October 2007. While I filed I485, I submitted 3 months paystubs of company C. My concern is will I be scrutinized by the immigration officer while processing my I485? Please experts, your suggestion and help is much appreciated.
2010 Best Couple Tattoo Design
NikNikon
June 16th, 2006, 06:01 PM
They look good to me Antonio. I wish I could get results like this with my 50mm 1.8, but then I've only tried on bands in small clubs, you had a few more stage lights to work with it looks like to me.
more...
sidd
06-19 04:50 PM
Hi.,
My wife and kids went for visa interview last friday (13th June 2008). Visa officer collected their passport and told that you will recieve the passport by next week. NO colored notice/slips are issued that time. But, We didn't receive the passport so far. The passport was NOT sent to the VFS office either. When we called the consulate regarding this, they told that the passport is with Consulate only and I-797 verification is under process which will take 5-10 business days.
My questions here is:
1. Once the visa officer accepts the passport, what are all the process involved before despatching the stamped passport to the applicant?
Note:
Currently I am in US under visa extension and yet to get my passport stamped for this extension period. My wife went to stamping with my new extension approval notice I-797.
Thanks
It is PIMS verification. Your I-797/petition is verified against a central database. If the petition info. is not already there in the database, then it may take around 1-4 weeks to get it entered in the database and verify it.
I would appreciate if you could share some more information about yourself that can be helpful to others...like....app. when your H1B was approved and from which CENTER. To which consulate your wife went for the stamping?
My wife and kids went for visa interview last friday (13th June 2008). Visa officer collected their passport and told that you will recieve the passport by next week. NO colored notice/slips are issued that time. But, We didn't receive the passport so far. The passport was NOT sent to the VFS office either. When we called the consulate regarding this, they told that the passport is with Consulate only and I-797 verification is under process which will take 5-10 business days.
My questions here is:
1. Once the visa officer accepts the passport, what are all the process involved before despatching the stamped passport to the applicant?
Note:
Currently I am in US under visa extension and yet to get my passport stamped for this extension period. My wife went to stamping with my new extension approval notice I-797.
Thanks
It is PIMS verification. Your I-797/petition is verified against a central database. If the petition info. is not already there in the database, then it may take around 1-4 weeks to get it entered in the database and verify it.
I would appreciate if you could share some more information about yourself that can be helpful to others...like....app. when your H1B was approved and from which CENTER. To which consulate your wife went for the stamping?
hair fighting irish tattoo. An elegant Irish tattoo of a
Raj_2009
12-16 03:37 PM
Hi experts,
I need some expert advice for H1B transfer case and vacation plan.
Background:
I am working with the current employer A who has processed my Green card(I-485 pending; I-140 approved ; EAD and AP document applied & received). It was going fine and I even had planned to go to Vacation to India at the beginning of January and even I have blocked the tickets and got the HDFC payment Bar code for H1B stamping(2 years left in 6 yrs period). Before booking the H1B visa interview, now I have got the situation that my client has decided to stop the contract by December end. But the client has offered that there is an employment opportunity to join the client.
Though my I-485 is pending and received EAD and AP documents, I still want to do the H1B transfer with AC21 portability. Now comes the complicated situation. Since I already planned for vacation after 3 years time gap, I wanted to go ahead without affecting my visa stamping and reentry to US. I decided to start the H1B transfer in premium processing with new Employer even before leaving US and planned to get the Visa stamped with the current employer A in Chennai assuming that I am still with the current employer . In this regard I had an attorney opinion also.
Legal opinion
But my attorney says that
1. If you get your H1B stamped with your old H1B, then you should have intent to continue with employer A after reentering US and join(H1b transfer) the new employer B only in the future time, not immediately entering US.
2. If you want to stamp H1B for the new employer B, then you can get the Visa stamped with employer B and then once reenter in US, I can join the new employer B immediately.
Questions:
But, for me, to cope up with the current economic situation, I need to go to India and come back and join the new employer B with the already approved new H1B with the employer B. But I want to get my H1B Visa stamped with the current employer A and then join here in employer B as soon as I come back to US from vacation. This way, I do not need to worry about the paystubs with the new employer.
I have few below questions regarding the situation that I have. Kindly answer my questions..
1. Can I go to Chennai consulate and get my new employer H1B stamped even with out joining the new employer B and with out any paystubs(not yet joined). In this situation, can I get the get the H1B visa stamped with out joining and no paystubs.
2. What if I start working with the employer B as soon I reentered US(after 2-3 days of reentry). Is this illegal / against the INS rules? Will this create any issue with my future Visa renewal or any GC card processing?
3. Will there be any question by the US consulate in Chennai about the new H1B approved(not yet joined) before we left US? Do they have any system which shows them during interview that there is another H1B already processed and approved though we have not joined then at the time of stamping in Chennai US consulate. What kind of answers should be given to them at that time?
4. Will there be any question in the port of entry in US when we reenter with the old H1B stamping. Someone suggested that when transferring new H1B your I-94 will also be sent with that. So, in the future you will have two I-94s(one given at POE and the other one given with new H1B approval notice. Is this situation illegal?.
5. In the worst case scenario, what if old H1B stamping fails? I have my AP document also. Can I enter USA with my AP document in case if the US consulate in chennai fails to stamp for my Old H1B visa?
6. Important - Can I join the employer B before leaving for vacation and then within 15 days, can I get the new employer letter for employment and then go to Chennai consulate for the New H1B visa stamping? I know that we do not have paystubs in this case. But we can get the employment letter from the new employer B. Is this the right situation or risky situation.
Kindly provide your honest opinions so that I can take my decision for my future.
Thanks,
Raj
I need some expert advice for H1B transfer case and vacation plan.
Background:
I am working with the current employer A who has processed my Green card(I-485 pending; I-140 approved ; EAD and AP document applied & received). It was going fine and I even had planned to go to Vacation to India at the beginning of January and even I have blocked the tickets and got the HDFC payment Bar code for H1B stamping(2 years left in 6 yrs period). Before booking the H1B visa interview, now I have got the situation that my client has decided to stop the contract by December end. But the client has offered that there is an employment opportunity to join the client.
Though my I-485 is pending and received EAD and AP documents, I still want to do the H1B transfer with AC21 portability. Now comes the complicated situation. Since I already planned for vacation after 3 years time gap, I wanted to go ahead without affecting my visa stamping and reentry to US. I decided to start the H1B transfer in premium processing with new Employer even before leaving US and planned to get the Visa stamped with the current employer A in Chennai assuming that I am still with the current employer . In this regard I had an attorney opinion also.
Legal opinion
But my attorney says that
1. If you get your H1B stamped with your old H1B, then you should have intent to continue with employer A after reentering US and join(H1b transfer) the new employer B only in the future time, not immediately entering US.
2. If you want to stamp H1B for the new employer B, then you can get the Visa stamped with employer B and then once reenter in US, I can join the new employer B immediately.
Questions:
But, for me, to cope up with the current economic situation, I need to go to India and come back and join the new employer B with the already approved new H1B with the employer B. But I want to get my H1B Visa stamped with the current employer A and then join here in employer B as soon as I come back to US from vacation. This way, I do not need to worry about the paystubs with the new employer.
I have few below questions regarding the situation that I have. Kindly answer my questions..
1. Can I go to Chennai consulate and get my new employer H1B stamped even with out joining the new employer B and with out any paystubs(not yet joined). In this situation, can I get the get the H1B visa stamped with out joining and no paystubs.
2. What if I start working with the employer B as soon I reentered US(after 2-3 days of reentry). Is this illegal / against the INS rules? Will this create any issue with my future Visa renewal or any GC card processing?
3. Will there be any question by the US consulate in Chennai about the new H1B approved(not yet joined) before we left US? Do they have any system which shows them during interview that there is another H1B already processed and approved though we have not joined then at the time of stamping in Chennai US consulate. What kind of answers should be given to them at that time?
4. Will there be any question in the port of entry in US when we reenter with the old H1B stamping. Someone suggested that when transferring new H1B your I-94 will also be sent with that. So, in the future you will have two I-94s(one given at POE and the other one given with new H1B approval notice. Is this situation illegal?.
5. In the worst case scenario, what if old H1B stamping fails? I have my AP document also. Can I enter USA with my AP document in case if the US consulate in chennai fails to stamp for my Old H1B visa?
6. Important - Can I join the employer B before leaving for vacation and then within 15 days, can I get the new employer letter for employment and then go to Chennai consulate for the New H1B visa stamping? I know that we do not have paystubs in this case. But we can get the employment letter from the new employer B. Is this the right situation or risky situation.
Kindly provide your honest opinions so that I can take my decision for my future.
Thanks,
Raj
more...
solaris27
10-02 09:00 AM
fearonlygod
Do it now , don't wait till last min.
Consulting companies can't just take your money.
You have to complain about them and also please provide us company name and website so other person don't join them .
Do it now , don't wait till last min.
Consulting companies can't just take your money.
You have to complain about them and also please provide us company name and website so other person don't join them .
hot fighting irish tattoos tribal
dealsnet
10-23 08:55 PM
Your labor wants masters only or bachelors with 5 years is acceptable?
Look bullet no. 2.
The following degree equivalency determinations have been made by the AAO, USCIS, District Court and through regulations:
1. A Bachelor of Medicine & Bachelor of Surgery (MBBS) is the foreign equivalent of a US medical degree. (2009)
2. A three year Bachelor’s degree from India is equivalent to a US Bachelor’s degree. (2008)
EB-2 & EB-3 Degree Equivalency | US Immigration Blog (http://blog.messersmithlaw.com/?p=50)
MurthyDotCom : Combination Degrees found by AAO Equal to 4-Year U.S. Degree (http://www.murthy.com/news/n_combdg.html)
YOU NEED GOOD LAWYER. FILE COMPLAINT WITH AAO.
Hello,
Please advice on this.
Application is filed under EB2 category.
In Labor certificate minimum education requirement is Master's
My I-140 is denied because of 3 years Bachelors degree.
I have 3 yrs bachelors + 2 years Masters + 4 yrs work exp.
Received RFE on 15th June 2009.
We submitted 2 education evaluations on Sept 3rd 2009, which says my Master’s degree is equivalent to US Masters Degree.
Received denial notice on 28th Sept 2009.
After denial, Lawyer is planning to file appeal with federal court.
Does anyone have the same issue?
I read about a company called Career Consulting International (CCI)on internet, it seems they can prove my 3 yrs bachelors degree is equivalent to 4 yrs US Bachelors degree.
To proof this CCI is charging a huge amount.
Does anyone have any info about CCI?
Please advice.
Thanks.
Look bullet no. 2.
The following degree equivalency determinations have been made by the AAO, USCIS, District Court and through regulations:
1. A Bachelor of Medicine & Bachelor of Surgery (MBBS) is the foreign equivalent of a US medical degree. (2009)
2. A three year Bachelor’s degree from India is equivalent to a US Bachelor’s degree. (2008)
EB-2 & EB-3 Degree Equivalency | US Immigration Blog (http://blog.messersmithlaw.com/?p=50)
MurthyDotCom : Combination Degrees found by AAO Equal to 4-Year U.S. Degree (http://www.murthy.com/news/n_combdg.html)
YOU NEED GOOD LAWYER. FILE COMPLAINT WITH AAO.
Hello,
Please advice on this.
Application is filed under EB2 category.
In Labor certificate minimum education requirement is Master's
My I-140 is denied because of 3 years Bachelors degree.
I have 3 yrs bachelors + 2 years Masters + 4 yrs work exp.
Received RFE on 15th June 2009.
We submitted 2 education evaluations on Sept 3rd 2009, which says my Master’s degree is equivalent to US Masters Degree.
Received denial notice on 28th Sept 2009.
After denial, Lawyer is planning to file appeal with federal court.
Does anyone have the same issue?
I read about a company called Career Consulting International (CCI)on internet, it seems they can prove my 3 yrs bachelors degree is equivalent to 4 yrs US Bachelors degree.
To proof this CCI is charging a huge amount.
Does anyone have any info about CCI?
Please advice.
Thanks.
more...
house fighting irish tattoo. Now copy your tattoo layer
vsoni
05-12 08:15 AM
Congratulation �KOSU
I got mine yesterday evening.
Thanks IV for their support during Green card painful journey.
Priority date:- June 2002
EB Category:- EB3
Approved 140: September 2007
Change the Job September 2007
Change EB3 to EB2, Recapture old priority date June 2002
New I140 approve FEB 2007 Premium processing.
New Category EB2
RD I485- May 2007
FP July 2007
NC: Not sure
I 485 approved:- 05/09/2008
I got mine yesterday evening.
Thanks IV for their support during Green card painful journey.
Priority date:- June 2002
EB Category:- EB3
Approved 140: September 2007
Change the Job September 2007
Change EB3 to EB2, Recapture old priority date June 2002
New I140 approve FEB 2007 Premium processing.
New Category EB2
RD I485- May 2007
FP July 2007
NC: Not sure
I 485 approved:- 05/09/2008
tattoo fighting irish tattoo. forms of Irish tattoos are
gccovet
12-17 01:53 AM
Thanks all for your replies...perhaps my question is not clear...I would have posted a new thread but was not easily able to figure out how to do so...
Will try to ask my question again...
I am not worried about when my FP expires and things on those lines....
my questions is for jobs that require green card or citizenship... there are some federal jobs out there that require security clearance....and for which they need either green card holders or citizen I beleive...
Now if one has an EAD (no green card yet, 485 pending for more than 1 year) and has got his/her FP done in FEB 2008 what does that mean...does it mean that once you have your FP done there is some kind of security clearance that you get from FBI ?...can you say you have active security clearance..if so what kind of security clearance is that called ?...as I said when I went for the Biometrics/FP (Code 3) they stamped the notice with the following
Biometrics Processing Stamp
ASC Side Code: __________XTE<location>
Biometrics QA Review by ________ (officer's signature)
Tenprints QA Reivew (officer's signature)
Thanks Gurus !!
SEcurity clearence for jobs are different / separate then immigration stuff. non-imm aliens can get lowest level of security clearance.
GCCovet
Will try to ask my question again...
I am not worried about when my FP expires and things on those lines....
my questions is for jobs that require green card or citizenship... there are some federal jobs out there that require security clearance....and for which they need either green card holders or citizen I beleive...
Now if one has an EAD (no green card yet, 485 pending for more than 1 year) and has got his/her FP done in FEB 2008 what does that mean...does it mean that once you have your FP done there is some kind of security clearance that you get from FBI ?...can you say you have active security clearance..if so what kind of security clearance is that called ?...as I said when I went for the Biometrics/FP (Code 3) they stamped the notice with the following
Biometrics Processing Stamp
ASC Side Code: __________XTE<location>
Biometrics QA Review by ________ (officer's signature)
Tenprints QA Reivew (officer's signature)
Thanks Gurus !!
SEcurity clearence for jobs are different / separate then immigration stuff. non-imm aliens can get lowest level of security clearance.
GCCovet
more...
pictures Notre Dame Fighting Irish
rajivkumarverma
10-16 07:16 PM
Whats the reason for the denial ?
My Labour was For EB-3 and my I-140 was filled in EB2
One of my Colleague also had same case but he got query on his
I-140 and mine got denied
I have a question
Now I will have to file new labour and I-140 can
Will I loose my old priority dates
My Labour was For EB-3 and my I-140 was filled in EB2
One of my Colleague also had same case but he got query on his
I-140 and mine got denied
I have a question
Now I will have to file new labour and I-140 can
Will I loose my old priority dates
dresses Mick Dwyers SS tattoo
Phat7
10-07 12:51 AM
:( that's bad... I confess I voted for myself yesterday, just couldn't resist the mischievous evil inside :evil: I can't change my vote can I? We can count one off me and I give my vote to Coppertop. ;)
If you disqualify me I will totally understand. :sigh:
If you disqualify me I will totally understand. :sigh:
more...
makeup fighting irish tattoo. Irish Tattoo Designs Flag of
jsb
04-16 03:59 PM
Here's our situation:
Both of our GC applications were filed in EB3 categories, by our individual employers, independent of each other.
My priority date is Apr 2002. My 140 is approved and 485 was filed in 2007 and is currently pending.
My husband's 140 is also approved and 485 was filed back in 2005. His priority date is Sep 2003.
Is there any way now to link both our applications, so he can take advantage of my earlier priority date without him having to withdraw his 485 application?
Attorneys might have an answer based on their past experience. I believe it might be best to act by calling USCIS as soon as your PD gets Current. Note that they don't see files in sequence of PD's. They see them in sequence of filing. As your husband has filed earlier, it is possible that his file is seen first. Anyway, best seems to call USCIS as soon as your PD is current, and let them deal with it. It may not require withdrawing of 485, as it is just a case of reclassification from EB3 to EB3-Dependant.
Best..
Both of our GC applications were filed in EB3 categories, by our individual employers, independent of each other.
My priority date is Apr 2002. My 140 is approved and 485 was filed in 2007 and is currently pending.
My husband's 140 is also approved and 485 was filed back in 2005. His priority date is Sep 2003.
Is there any way now to link both our applications, so he can take advantage of my earlier priority date without him having to withdraw his 485 application?
Attorneys might have an answer based on their past experience. I believe it might be best to act by calling USCIS as soon as your PD gets Current. Note that they don't see files in sequence of PD's. They see them in sequence of filing. As your husband has filed earlier, it is possible that his file is seen first. Anyway, best seems to call USCIS as soon as your PD is current, and let them deal with it. It may not require withdrawing of 485, as it is just a case of reclassification from EB3 to EB3-Dependant.
Best..
girlfriend fighting irish tattoo. Full Back Tattoo ~ floral; Full Back Tattoo ~ floral
Dhundhun
03-14 07:22 PM
I was offered a ticket to India without me asking them (big american corp). But since I was not going back and found another job within a short time, it was of no use to me. They will usually buy a ticket for you, won't give you money directly.
If company has brought you from India and terminated the job, as a part of filing H1B obligation, they are supposed to give a ticket to go back - but not cash.
If company has brought you from India and terminated the job, as a part of filing H1B obligation, they are supposed to give a ticket to go back - but not cash.
hairstyles fighting irish tattoos
frostrated
10-02 03:02 PM
the two are separate as they belong to different countries. you can maintain both as long as you fulfill the requirements to keep both of the permits current.
Immigstories
01-21 06:56 PM
Gurus
Please share your thoughts on my question above.....
Please share your thoughts on my question above.....
mhtanim
06-07 09:51 PM
After sending RFE response, I got 1st LUD on 06/02/2009 with message change.
Soft LUDs on: 06/03/2009, 06/04/2009, 06/05/2009
Soft LUDs on: 06/03/2009, 06/04/2009, 06/05/2009